.308 | AR10 Firing Pin - HP (High Pressure)

Question

Q: Will this fit at db ar 10 or bcg

Asked by: Xavion Soccamanno - 7/29/2026

Q: Will this work in my bear creek 6.5 creedmoor AR-10

Asked by: Eric Flynn - 3/11/2026

Q: Will this tip fit in a Anderson manufacturing am10 308 rifle I already ordered a standard size and it was to big and my bolt and charging handle kept getting stuck

Asked by: Jacobb White - 10/25/2025

Q: firing pin 308 ar10 Aero Precision Tip diameter .068 .08 is way too large 479-347-9113 I'm not radio active

Asked by: L. Clay Cooper USAF Ret - 8/7/2025

Q: What is the tip dimension of this firing pin

Asked by: Marty - 6/23/2025

Q: To be clear, these firing pins have the smaller (.0645" or 1.66mm) tip diameter? I have an Aero Precision high pressure AR 10 that requires the small diameter firing pin. I already had to return a standard AR 10 pin for this reason and would like to double check with you guys. Thanks for your time. I appreciate it.

Asked by: Dennis Fails - 4/6/2025

Q: Does this 308 HP firing pin have a 0.062 tip?

Asked by: Safet Metjahic - 3/25/2025

Q: Will this high pressure firing pin fit in my aero precision lr308 .070 firing pin hole bcg

Asked by: John Ball - 1/24/2025

Q: Will this pin work in a Bear Creek Arsenal AR10?

Asked by: Shawn - 11/18/2024

Q: Is the tip .065?

Asked by: Jeff - 10/31/2024

Questions about this item? Ask here.

Accepted Answer

A: It should fit. They do call out a high pressure firing pin on their build specs.

Answer provided by: Administrator (7/29/2026)

Accepted Answer

BCA uses a HP Firing Pin in their AR10. When you look at their AR10 BCG they are for AR10/6.5 Creedmoor, the 6.5 Creedmoor uses a HP firing pin, so a lot of manufacturers have started to make both their AR10 BCG compatible with 6.5 Creedmoor so they have switched over to HP bolt assemblies and HP firing pins.

Accepted Answer

If you tried a standard firing pin they do have a larger tip and won't fit the bolt. I'm not familiar with what AM is doing for bolts, but if they are using a HP Bolt Assembly then you would need the HP Firing Pin. If you are unsure you could call AM or email them and ask if their .308 rifle bolt assemblies require a proprietary firing pin or if it's a HP firing pin.

Accepted Answer

Our .308/AR10 Firing Pin for HP will fit the Aero Precision Bolt Assembly as it is the .068 tip.

Accepted Answer

A: The tip is 0.068

Answer provided by: Administrator (7/18/2025)

Accepted Answer

The tip is 0.068. We have been manufacturing and selling HP firing pins for a few years and have not had any complaints with various HP Bolts.

Accepted Answer

A: The tip is 0.068

Answer provided by: Administrator (4/6/2025)

Accepted Answer

A: Should work fine, the firing pin tip is 0.068"

Answer provided by: Administrator (2/21/2025)

Accepted Answer

BCA uses a HP Firing Pin in their AR10. When you look at their AR10 BCG they are for AR10/6.5 Creedmoor, the 6.5 Creedmoor uses a HP firing pin so a lot of manufacturers have started to make both their AR10 BCG compatible with 6.5 Creedmoor so have switched over to HP bolt assemblies and HP firing pins.

Accepted Answer

A: The tip is 0.068

Answer provided by: Administrator (10/31/2024)

.308 | AR10 Firing Pin - HP (High Pressure)

Related Items

Recently Viewed Items

.308 | AR10 Firing Pin - HP (High Pressure)

Related Items

Recently Viewed Items

Mailing List