AR-15 7.62x39 | 5.45x39 Enhanced Firing Pin

Very pleased with this firing pin and BRA's service. I bought a couple cases of Golden Tiger .223 ammo from an online retailer and had a about 40% failure to fire rate out of my AR. Ordered this firing pin and got it in a couple of days. The fit and finish is truly excellent and clearly better apparent quality than the pin that came in my Mil-Spec BCM bolt carrier group. Regardless, I popped in and tried shooting the GT .223 ammo again. It worked 100% And even fired the previous FTFs. I then tried the pin on several "normal" .223/5.56 loads to make sure that it wasn't going to pierce any primers. Zero pierced primers out of 120 rounds! I tried it on Wolf/Barnaul .223 55gr, Federal/Lake City m855 and m193, PPU .223 55gr, Carl Gustaf m855, and Hornady TAP Training steel case. Looking at the fired primers, it is clear that the firing pin is making a slightly deeper impression, but from what I can see the metal doesn't at all look stretched or distressed. I would recommend this firing pin to anyone.

A must have if you shoot a lot of steel case ammo very well built.

Your enhanced firing pin works great. It fixed my Colt AR 7.62x39 light strike problem; fires every time. It even fired the light strikes from previous attempts. Thanks.

Solved my probably with steel case wolf ammo This is the only firing pin you should be using in your 7.62x39 builds

WORKS WORKS WORKS! Having some light strikes and this fixed it all. Must have for this caliber and shooting crappy ammo

Problem solved! My new AR would only fire about 50% of steel case rounds. Installed this enhanced firing pin and Wolf spring. Gun now shoots 100% and even fired the rounds that previously wouldn't fire. Must have for a 7.62x39 AR15.

This is a must with steel cased ammo in the 7.62x39 ar.

Problem has been rectified. Excellent people to deal with

Buy two , give other one to your son or friend , they will thank you for it !!!! Eats Tula and new shipment of Golden Tiger 223. Great product !!! Thank you !!

Installed the upgraded firing pin and hammer spring on my AR. Worked flawlessly on the range today with zero FTE/FTF!

Bought this because of the reviews. I shot 40rds of monarch steel case no problem. Tulaammo though, I had 4 light primer strikes out of 80rds. All 4 did fire on 2nd try. Just expected better from reading the reviews. 4 out of 80 isn't horrible I guess. On the plus side shipping was extremely fast.-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------WE SPECIFICALLY CALL OUT IN UNDER OUR DISCLAIMER TAB THAT: Tula Ammunition and Golden Tiger have issues where some primers are set too far in and will still cause light strikes even with an enhanced firing pin. We highly recommend sticking to steel cause ammunition such as Wolff or Silver Bear.

Was bummed when I built my 7.62 AR and it would barely fire any rounds. Put in the enhanced firing pin and power hammer spring and it fired every single round and even the old rounds that the stock firing pin didn’t fire.

This thing works great! Before I had this, every few rounds was a light strike. I have put more than 100rds through my weapon with this, and have yet to have a light strike. I'll probably get a spare to keep on hand. THX

I had trouble firing Red Army Standard ammunition after buying my KS and was disappointed because I have 1000rds of it. When I got this firing pin I measured it with calipers and noticed it is longer than the KS pin. The KS pin is barely longer than the standard 5.56 pin, but this BRA pin is definitely long enough to get the job done. I've had no issues with light strikes since I swapped. Totally worth $11 for reliability!

love this firing pin. All my commie ammo never missed a ignition and none of my brass primers were punctured! Worth every penny. Thanks so much!!!

Nothing like having a top notch spare. Thanks!!

I got these and the wolf hammer spring and fixed all my no fire issues. I recommend these to everyone. I'll be putting them in all my new uppers in the future

Great product, had a customer with a 7.62x39 AR15 that was getting light strikes on WPA steel case ammo and between the extended firing pin and the Wolff extra power hammer spring the gun has run 100% so far. 10/10 value

Got this today and ran through several dozen rounds of each type/mfg from my “crap primers” can, zero failures to ignite or pierced primers. Inspected on arrival and the tolerances on the part were superb. Definitely using BRA EFPs in all my future builds.

Was having 3-5 light primer strikes per 20 rounds (steel ammo) with stock firing pin on my BCA upper 7.62x39. Since the replacement with enhanced firing 0 light primer strikes and With various ammo Tula, wolf, red army. Very pleased thus far.

beautiful....firing pin to resolve my problem on AR-15 in 7.62x39 .Now I can shoot Tulammo without any problem. I din not change the SPRING just firing pin.I might buy one more for future ...In case ,if it breaks.!!!!! Thanks*****

100 rounds of Tulammo 0 light primer strikes. All rounds fired flawlessly. Awesome upgrade

I bought two of these and I wouldn't use anything else for a 7.62x39 builds. No FTFs works great.

Build an AR 7.62x39 with an 8.5" barrel. I knew once I made it the gun might have light strike issues due to reviews on most BCGs for AR 7.62 platform. I build the AR, took it to the range to adjust the gas block for proper ejection angle and LRBHO. One in five rounds failed to fire. Put the BRA enhanced firing pin in went back and not one problem. I will say the firing pin I took out looked like it pretty generic rough cast. Note: I am running an ALG defense trigger group with the 4.5lb trigger spring. If you run the standard 6 lb., I am sure you'll be fine. Really like the new firing pin. It was nicely machined. I could not be happier. I heard this item is compatible with AR 5.45x39 build, but I will need to verify it.

The only firming pin I could find that would allow my ar 15 to fire all of my 7.62x39 rounds on my magazine with out one miss fire