AR-15 / M16 5.56 Extractor Kit

A: They will be back in stock any day now.

A: Stove piping can be a number of causes such as gassing issue, ejector spring, cartridge could be sticking in the chamber, etc. Please call Charles at 386.410.5162 if you would like to troubleshoot with him.

A: A 5.56 extractor is used on a mil-spec 5.56 bolt assembly. If you have a 7.62x39 bolt assembly you will need to use an 7.62x39 extractor for the 7.62x39 bolt assembly.

A: A 5.56 does not utilitze a enhanced firing, you can pierce primers. 5.56 does not use primers as hard as the 7.62x39 and 5.45x39 calibers. If you are getting light strikes with a 5.56 then you may have your hammer spring installed backwards causing it to unwind and thus losing energy to set off the primers of steel case.

A: Yes it is Made in the USA

A: Yes it is stronger.

A: Our extractor will fit any mil-spec AR-15 bolt assembly.

A: Our extractors are mil-spec and will work with any AR-15 5.56 mil-spec bolt assembly so if your bolt assembly is mil-spec it will work.

A: We only use phosphate for these small part. From past experience (live and learn) it's best to have these small parts phosphate as melonite can over penetrate and cause brittleness which equals parts failure.