Q: ┬┐El extractor 7.62x39 BRA funciona con el BCG FailZero?

Asked by: Nelson - 6/21/2023
A: Yes it should function fine with FailZero's 7.62x39 BCG
Answer provided by: Administrator (6/22/2023)

Q: Will this extractor fit my radical firearms RPR HBAR 7.62x39 16" barrel rifle?

Asked by: Bearmagnum56 - 2/11/2023
A: If your Radical Firearms takes a AR-15 Bolt assembly then this extractor should work fine, we only know of issues with Bear Creek Arsenal.
Answer provided by: Administrator (2/23/2023)

Q: Is this work with bear creek arsenal? Thank you

Asked by: Zid Cabuena - 6/8/2022
A: No, we recommend if you have a BCA bolt assembly stick to their extractors.
Answer provided by: Administrator (6/21/2022)

Q: how does this extractor hold up on steel ammo such as tulammo and wolf steel case i blown out 3 already from radical firearms, ar stoner and prime arms?

Asked by: julian alaniz - 1/26/2022
A: We put up a disclaimer tab on our products page regarding what will cause premature failure in extractors. We don't recommend Tula or Red Army, all other steel case ammunition run fine. To read more about our disclaimer, please click on the disclaimer tab above.
Answer provided by: Administrator (2/1/2022)

Q: Would this extractor work with the bolt in a Palmetto KS-47? Is this extractor a good option for steel cased ammunition?

Asked by: Jason - 11/22/2021
A: Yes; however, please see our DISCLAIMER tab on the product's page which basically says PSA KS-47 are overgassed and are harsh on extractors.
Answer provided by: Administrator (11/22/2021)

Q: will this work on a psa ks47

Asked by: Roger Benjamin - 11/18/2021
A: Yes; however, please see our DISCLAIMER tab on the product's page which basically says PSA KS-47 are overgassed and are harsh on extractors.
Answer provided by: Administrator (11/22/2021)

Q: Hello ,will this 7.62 extractor function in the KS47 Gen2 upper. Thanks for your Assistance

Asked by: Kencade industries - 10/23/2021
A: It will, but we make no warranty. The PSA KS47 is overgassed and why it has issues with premature extractor failures as well as using Tula and Red Army. We highly suggest sticking with Wolf, Silver or Brown Bear.
Answer provided by: Administrator (10/25/2021)

Q: Does this come with spring,plunger and O ring?

Asked by: Jessica - 10/21/2021
A: No you will need the extractor kit which has the small parts you are looking for: https://www.blackriflearms.com/AR-15-M16-762x39-Extractor-Kit_p_252.html
Answer provided by: Administrator (10/25/2021)

Q: Will this extractor work in a PSA KS-47?

Asked by: Luke - 10/17/2021
A: It will, but we make no warranty. The PSA KS47 is overgassed and why it has issues with premature extractor failures as well as using Tula and Red Army. We highly suggest sticking with Wolf, Silver or Brown Bear.
Answer provided by: Administrator (10/25/2021)

Q: when will you have more of these?

Asked by: george - 8/28/2021
A: Hopefully within 3 to 6 weeks.
Answer provided by: Administrator (9/26/2021)

Q: I have a couple 7.72 bolts which came with an older Colt rifle I have. Looking to replace the existing extractor with one of these to minimize any extractor breakage. Question...will it fit the Colt bolt. The walls of the bolt face are thinner on the two bolts I have for the 7.62x39 rifle...is this what you are saying needs to be .125 dimension? Thanks, John

Asked by: John Talucci - 7/29/2021
A: If the Colt bolt is per mil-spec then you should be able to utilize the extractor with no issues.
Answer provided by: Administrator (8/16/2021)

Q: I have both a BCA 7.62x39 AR style pistol and a AR Stoner 7.62x39 AR style rifle. I would like to order a couple extra extractors for each. However your disclaimers specifically exclude BCA 7.62x39 bolt assemblies. Why is that? What is the difference that makes them incompatible? I suspect that he AR Stoner 7.62x39 upper "might" be a rebranded BCA upper as well.

Asked by: Brandt Schermann - 6/29/2021
A: We don't like to call out other manufactures and what we discovered. For a further detailed explanation you can call us and we would be happy to discuss what we found when another customer sent his BCA bolt assembly to us for inspection and why the incompatibility issue. Many customers had his same experience that they couldn't pair their bca bolt assembly to any other manufacturers extractors.
Answer provided by: Administrator (7/27/2021)

Q: Will this work on PSA ks47

Asked by: John - 6/28/2021
A: Yes, but please see information regarding using in PSA KS47 Bolt Carriers. Under products page click on DISCLAIMER tab.
Answer provided by: Administrator (6/29/2021)

Q: Will this work in the ks47 gen2 bolt

Asked by: Manly - 6/6/2021
A: Yes, but please see information regarding using in PSA KS47 Bolt Carriers. Under products page click on DISCLAIMER tab.
Answer provided by: Administrator (6/29/2021)

Q: I am assuming this is the extractor that will work with Your 7.62 BCG?

Asked by: Allen Jackowiak - 6/5/2021
A: Of course, we use them in our bolt assemblies that we use in our BCGs.
Answer provided by: Administrator (6/29/2021)

Q: Would this extractor work with an RRA Lar-47?

Asked by: Ricky Bobby - 4/12/2021
A: If RRA LAR-47 uses an AR-15 7.62x39 extractor then these will fit. If you are unsure please contact RRA.
Answer provided by: Black Rifle Arms Sales Team (4/20/2021)

Q: will this extractor work with a PSA KS47 BCG?

Asked by: Pat - 4/7/2021
A: I do have customers that use them but we don't warranty for use with KS-47 as talking with customers their rifle is over gassed which causes undue stress on the extractors. Best ejection pattern for 7.62x39 is around the 4 o'clock pattern (as look at a clock) and we don't warranty for use with Tula, we highly recommend Wolf Ammunition.
Answer provided by: Black Rifle Arms Sales Team (4/20/2021)

Q: Does your x39 extractor kit work with aim surplus bolts

Asked by: Robert Bobb - 3/12/2021
A: The only known issue we are aware of is use in Bear Creek Arsenal bolt assemblies
Answer provided by: Black Rifle Arms Sales Team (3/14/2021)

Q: Hello! I have a primary arms rf-15 AR. I keep having issues with extractors breaking with steel and brass. Any recommendations? I'm probably gonna order one of your 7.62x39 extractors and try it with brass and if it breaks that extractor then I will start checking the headspacing and other key measurements. And advice is appreciated! Thank you

Asked by: Justin Camiscioni - 2/14/2021
A: Two things that cause premature extractor failures are overgassing and Tula. Tula has a tendency to not shrink properly and stick in the chamber which puts stress on the extractor.
Answer provided by: Black Rifle Arms Sales Team (2/16/2021)

Q: Will this fit a PSA KS-47 ?

Asked by: John Smith - 1/21/2021
A: We do have customers that use them but we don't warranty for use with KS-47 as talking with customers their rifle is over gassed which causes undue stress on the extractors. Best ejection pattern for 7.62x39 is around the 4 o'clock pattern (as look at a clock) and we don't warranty for use with Tula, we highly recommend Wolf Ammunition.
Answer provided by: Black Rifle Arms Sales Team (1/26/2021)

Q: will this fit on PSA ks-47 bolt ?

Asked by: CH3V - 8/25/2020
A: I do have customers that use them but we don't warranty for use with KS-47 as talking with customers their rifle is over gassed which causes undue stress on the extractors. Best ejection pattern for 7.62x39 is around the 4 o'clock pattern (as look at a clock) and we don't warranty for use with Tula, we highly recommend Wolf Ammunition.
Answer provided by: Charles B. (8/26/2020)